Ram Slots 1 3 Vs 2 + 4 Reddit

Baca selengkapnya

Raja's thread explains why you shouldn't mix and match memory kits. If there is old ram here and you are going to use it, pair the new ram correctly.

Thaiphoon Burner Giving A Crc Error On New Rgb Ram 1 Out Of 4 Sticks Spd Checksum Bytes 80h-fdh B9c3h Error Should I Be Worried Overclocking

2) i noticed the dram voltage in the bios was set to auto at 1.2v.

Ram slots 1 3 vs 2 + 4 reddit. Try not to put three modules in a 4 module slot. My ram is supposed to run at 1.35v. However it would be better to add two with the same total memory as three due to dual channel memory being faster.

Which refers to the following: In the manual it says it can handle dual channel in both sets. Indicates that the ram i have is compatible with the board.

Msi board dual channel memory mode slots 1&3 vs 2&4 ? I've read in various places that the dual channel slots furthest from the cpu (2+4) are somehow better to use than slots 1+3 if you only have two sticks. So you want have ram sticks in 1 and 3 or 2 and 4.

I'm upgrading to skylake and got 2 sticks of 8gb ddr4 to go with the new z170 mobo. My msi manual says to use dimms 1 and 3 for 2 stick dual channel mode. The fps drops are fewer and the 1% lows are particularly higher.

It also goes so far as to say to ensure a successful system. However, as chris liu points. The intel system saw a mild 4% performance boost when using four memory modules.

Op · 5y · edited 5y. The one thing i'm a little on edge about is that in the motherboard manual, it states to put the ram in slot 2 first, followed by a. We suggest that you install the modulesinto slots a2 and b2 for better compatibility.

Hello, since long time already, we are told, when assembling pc and where motherboard has 4 ram slots, that we should insert first pair of ram into 2nd and 4th ram slot first (or other two assigned ram slots) and only after that, if we get 2nd pair we should put it into 1st and 3rd slot. I reseated the ram, which is in the 2 and 4 slot, reseated all power connections, reseated the graphics card. Always install ram in the slots from the bottom to the top.

My motherboard is an msi z170a gaming pro, my cpu is an i7 6700k, and my ram is hyperx black fury 2x8 ddr4 2666mhz sticks, and i currently have the two sticks in slots 1&3 as 2&4 didn't boot. As in the thread title, if i was too install 2 x 2gb sticks in the 2 and 4 slots on my motherboard would the results be the same as if i used 1 and 3. The third stick won’t be part of dual channel.

This directly translates into smoother gameplay and fewer bouts of anger. It will be less effective. Think of it like a bus, and each pair of ram slots gets one bus.

I currently have 4 sticks of ram but want to upgrade to larger dimms and go to only 2. Skye jan 21, 2017 @ 4:11am. Since the last shut down i did two things.

If there is only one memory card and it is in the top slot, remove the top memory card before installing ram in the bottom slot. Add as many as your motherboard will support. (so basically both sticks are at same colored slots) 1.

Msi even have a video tutorial on this but the guy only installs one stick. The guide says that the dimm socket support (optional) supports 2, but not 4. ^ there are four slots here.

Not a single mention in the manual. Dual channel (up to 15% boost to fps in gaming). Memory slots 1 and 3 are yellow and 2 and 4 are red.

Dual channel = both sticks are at same channel. At least for the manufacturer, lol. Yes, it will add more ram.

No, thing is, if u look at the naming, 4 + 3 are same colors and 1 + 2. If using unbalanced ram (a 2gb and a 4gb module, for instance) pair up ram in slots 1 and 3 or 2 and 4. My coolermaster fan will prevent most taller ram heatsinks in dimm 1.

“never put all your eggs in one basket” (ram comes with a lifetime warranty better to have a spare than not have a computer while waiting on your rma).

Zen 3 Ram Speeds An Analysis Of The Best Ram For Zen 3 Amd